Tannoy Reveal 6D Active Studio Reference Monitors at Vtac. Huge selection of music gear and discount musical equipment

Tannoy Reveal 6D Active Studio Reference Monitors

A whole generation of artists and producers have built their award-winning recordings on the original Reveal active; now the Reveal 6D takes nearfield monitoring to a new level. Tannoy's exclusive Activ-Assist technology allows you to tune the monitor to the room's acoustics for an unparalleled sonic integration. Go ahead and connect it directly to the S/PDIF output from your DAW, or stay in the analog.MAIN FEATURESFrom the front: • 40mm MDF sculpted baffle stiff, heavy and rigid and minimises diffraction. • Recessed drive units flush with the baffle surface minimises diffraction. • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image. • Smooth tweeter faceplate contours prevent diffraction and cavity effects. • 10 point fixing maximises contact between drive unit and baffle. • New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. • Bass unit development using Klippell analysis equipment to minimise offsets and linearise the suspension components. • On/Mute (energy saving mode) via the Tannoy logo push switch. • LED indicator shows Active/Energy Saving modes.From the side: • 18mm MDF cabinet construction provides stiffness and minimises colouration. • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange. • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.From the rear: • Double insulated to prevent ground loops no safety earth required. • CSA/CE/CCC/CB full safety approvals including China. • Spare fuse in IEC mains connector. • On/Off mains isolator switch. • Substantial heat sinking for long term cool running and 24/7 reliability. • XLR and 1/4" jack Combi connector for balanced input. • Switch adjacent to XLR selects digital or analogue input. • RCA input for SPDIF with 75 Ohm terminating impedance. • 2nd RCA for SPDIF output for slaving a stereo pair. • Yellow LED indicator lights up when digital lock is achieved. • 3-way switch selects which channel of the SPDIF stream is decoded, marked Left/Right/Mono. Switching is post 2 channel DAC. • Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V) input for full rated output. • Trim/Gain control works on SPDIF input post DAC. • Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers. • First bank of

Buy Online at Musician's Friend - Click Here!

Brand Name: Tannoy Brand Name: Tannoy

Category: RecordingMonitors and HeadphonesMonitorsActive Category: RecordingMonitors and HeadphonesMonitorsActive

Store: Musician's Friend Store: Musician's Friend

$Item Description: A whole generation of artists and producers have built their award-winning recordings on the original Reveal active; now the Reveal 6D takes nearfield monitoring to a new level. Tannoy's exclusive Activ-Assist technology allows you to tune the monitor to the room's acoustics for an unparalleled sonic integration. Go ahead and connect it directly to the S/PDIF output from your DAW, or stay in the analog.MAIN FEATURESFrom the front: • 40mm MDF sculpted baffle stiff, heavy and rigid and minimises diffraction. • Recessed drive units flush with the baffle surface minimises diffraction. • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image. • Smooth tweeter faceplate contours prevent diffraction and cavity effects. • 10 point fixing maximises contact between drive unit and baffle. • New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. • Bass unit development using Klippell analysis equipment to minimise offsets and linearise the suspension components. • On/Mute (energy saving mode) via the Tannoy logo push switch. • LED indicator shows Active/Energy Saving modes.From the side: • 18mm MDF cabinet construction provides stiffness and minimises colouration. • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange. • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.From the rear: • Double insulated to prevent ground loops no safety earth required. • CSA/CE/CCC/CB full safety approvals including China. • Spare fuse in IEC mains connector. • On/Off mains isolator switch. • Substantial heat sinking for long term cool running and 24/7 reliability. • XLR and 1/4" jack Combi connector for balanced input. • Switch adjacent to XLR selects digital or analogue input. • RCA input for SPDIF with 75 Ohm terminating impedance. • 2nd RCA for SPDIF output for slaving a stereo pair. • Yellow LED indicator lights up when digital lock is achieved. • 3-way switch selects which channel of the SPDIF stream is decoded, marked Left/Right/Mono. Switching is post 2 channel DAC. • Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V) input for full rated output. • Trim/Gain control works on SPDIF input post DAC. • Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers. • First bank of 8001 3332$ Item Description: A whole generation of artists and producers have built their award-winning recordings on the original Reveal active; now the Reveal 6D takes nearfield monitoring to a new level. Tannoy's exclusive Activ-Assist technology allows you to tune the monitor to the room's acoustics for an unparalleled sonic integration. Go ahead and connect it directly to the S/PDIF output from your DAW, or stay in the analog.MAIN FEATURESFrom the front: • 40mm MDF sculpted baffle stiff, heavy and rigid and minimises diffraction. • Recessed drive units flush with the baffle surface minimises diffraction. • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image. • Smooth tweeter faceplate contours prevent diffraction and cavity effects. • 10 point fixing maximises contact between drive unit and baffle. • New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. • Bass unit development using Klippell analysis equipment to minimise offsets and linearise the suspension components. • On/Mute (energy saving mode) via the Tannoy logo push switch. • LED indicator shows Active/Energy Saving modes.From the side: • 18mm MDF cabinet construction provides stiffness and minimises colouration. • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange. • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.From the rear: • Double insulated to prevent ground loops no safety earth required. • CSA/CE/CCC/CB full safety approvals including China. • Spare fuse in IEC mains connector. • On/Off mains isolator switch. • Substantial heat sinking for long term cool running and 24/7 reliability. • XLR and 1/4" jack Combi connector for balanced input. • Switch adjacent to XLR selects digital or analogue input. • RCA input for SPDIF with 75 Ohm terminating impedance. • 2nd RCA for SPDIF output for slaving a stereo pair. • Yellow LED indicator lights up when digital lock is achieved. • 3-way switch selects which channel of the SPDIF stream is decoded, marked Left/Right/Mono. Switching is post 2 channel DAC. • Trim/Gain control over +6dB/-12dB range reference 0dBV (0.775V) input for full rated output. • Trim/Gain control works on SPDIF input post DAC. • Switch selection of 12dB/8ve 80Hz hi-pass filter for use with AV subwoofers. • First bank of 8001 3332

Keywords: 604103 DUAL MONITERS PRECISION DEFINITON CONCENTRIC MONITER RECORDING 0 COAXIAL80013332 Keywords: 604103 DUAL MONITERS PRECISION DEFINITON CONCENTRIC MONITER RECORDING 0 COAXIAL80013332

Online Shopping: Musician's Friend offers a great way to save money on musical instruments, with their Clearance Center department, bulging with overstocks and discontinued gear at discount prices. They are constantly adding new discount bargains so check back often. Visit Musician's Friend for Tannoy Reveal 6D Active Studio Reference Monitors and other Tannoy, RecordingMonitors and HeadphonesMonitorsActive and discount musical instruments, music gear and musical equipment.

Click here for more Tannoy products

Click here for more RecordingMonitors and HeadphonesMonitorsActive products

Browse products: Previous | Next