Vtac
HomeBrandsCategories
Auralex pArtScience SpaceCoupler Soundproofing MaterialAuralex pArtScience SpaceCoupler Soundproofing Material

Auralex pArtScience SpaceCoupler Soundproofing Material

It's not often that a product comes along that introduces new approaches to solving acoustic problems. The SpaceCoupler is such a product, and we are completely enamored with its many soundproofing applications.Loosely coupling spaces is a design technique that was developed by Russ Berger to sculpt high quality live recording spaces out of rooms with otherwise small—some would say almost unusable—footprints. Berger has been using the technique for close to 20 years to create truly unique acoustical environments in his studio designs.To understand how the SpaceCoupler noise control material works in a loosely coupled configuration, let's start with a small home studio, just cozy enough to fit a drummer and a kit, say, 14' long by 12' wide with a 15' high ceiling. The lower portions of the walls—say up to about 8' high—are treated with a good broadband absorber such as AudioTile, with the absorber coverage as close to 100% as can be achieved. The upper portion of the walls are "hard," creating a live reflective area.SpaceCouplers placed horizontally at just above the 8' high mark separates the height of the room into two areas with a controlled aperture. The SpaceCouplers in the aperture redirect sound energy into the upper portion of the room where it is diffused. Sound then returns—again redirected by the SpaceCouplers—to provide a "big room" reverberation tail that sounds exceptional. The quality of the resulting tail is smooth, without any acoustical artifacts or anomalies that would be difficult to work with in the post-processing and mixing phases.The loosely coupled space application is just the beginning. The SpaceCoupler can be used over flat absorbers to increase their efficiency. Two of our favorite applications of the SpaceCoupler are over absorbers above the mix position and over deep absorbers on the rear wall of a control room. The former is a very efficient, space-conserving method of eliminating the floor-ceiling first and second order axial modes that plague basement and bedroom studios. A relatively small area of SpaceCouplers over a few inches of noise absorption on the ceiling can greatly increase the low frequency "punch" in the room and allow for better mixing decisions for low frequency content. Bye-Bye Mud. Hello Translatable Mixes!The latter application—SpaceCouplers over deep sound absorbers on the control room rear wall—is most often found in "neutral" room designs. Mixing the SpaceCouplers with some SpaceArray diffusors over deep absorbers can provide high frequency scattering, yet still allow the low frequency sound into the deep absorbers to control modal build-up and noise cancellation in the room.Like the SpaceArray, the SpaceCoupler is handmade from solid wood. The craftsmanship is exceptional and the musical qualities of the Paulownia wood (used in musical instrument construction) give a very natura

Buy Online at Musician's Friend - Click Here!

Brand Name: AuralexBrand Name: Auralex

Category: RecordingMedia and AccessoriesStudio FoamCategory: RecordingMedia and AccessoriesStudio Foam

Store: Musician's FriendStore: Musician's Friend

Item Description: It's not often that a product comes along that introduces new approaches to solving acoustic problems. The SpaceCoupler is such a product, and we are completely enamored with its many soundproofing applications.Loosely coupling spaces is a design technique that was developed by Russ Berger to sculpt high quality live recording spaces out of rooms with otherwise small—some would say almost unusable—footprints. Berger has been using the technique for close to 20 years to create truly unique acoustical environments in his studio designs.To understand how the SpaceCoupler noise control material works in a loosely coupled configuration, let's start with a small home studio, just cozy enough to fit a drummer and a kit, say, 14' long by 12' wide with a 15' high ceiling. The lower portions of the walls—say up to about 8' high—are treated with a good broadband absorber such as AudioTile, with the absorber coverage as close to 100% as can be achieved. The upper portion of the walls are "hard," creating a live reflective area.SpaceCouplers placed horizontally at just above the 8' high mark separates the height of the room into two areas with a controlled aperture. The SpaceCouplers in the aperture redirect sound energy into the upper portion of the room where it is diffused. Sound then returns—again redirected by the SpaceCouplers—to provide a "big room" reverberation tail that sounds exceptional. The quality of the resulting tail is smooth, without any acoustical artifacts or anomalies that would be difficult to work with in the post-processing and mixing phases.The loosely coupled space application is just the beginning. The SpaceCoupler can be used over flat absorbers to increase their efficiency. Two of our favorite applications of the SpaceCoupler are over absorbers above the mix position and over deep absorbers on the rear wall of a control room. The former is a very efficient, space-conserving method of eliminating the floor-ceiling first and second order axial modes that plague basement and bedroom studios. A relatively small area of SpaceCouplers over a few inches of noise absorption on the ceiling can greatly increase the low frequency "punch" in the room and allow for better mixing decisions for low frequency content. Bye-Bye Mud. Hello Translatable Mixes!The latter application—SpaceCouplers over deep sound absorbers on the control room rear wall—is most often found in "neutral" room designs. Mixing the SpaceCouplers with some SpaceArray diffusors over deep absorbers can provide high frequency scattering, yet still allow the low frequency sound into the deep absorbers to control modal build-up and noise cancellation in the room.Like the SpaceArray, the SpaceCoupler is handmade from solid wood. The craftsmanship is exceptional and the musical qualities of the Paulownia wood (used in musical instrument construction) give a very natura PSSC22Item Description: It's not often that a product comes along that introduces new approaches to solving acoustic problems. The SpaceCoupler is such a product, and we are completely enamored with its many soundproofing applications.Loosely coupling spaces is a design technique that was developed by Russ Berger to sculpt high quality live recording spaces out of rooms with otherwise small—some would say almost unusable—footprints. Berger has been using the technique for close to 20 years to create truly unique acoustical environments in his studio designs.To understand how the SpaceCoupler noise control material works in a loosely coupled configuration, let's start with a small home studio, just cozy enough to fit a drummer and a kit, say, 14' long by 12' wide with a 15' high ceiling. The lower portions of the walls—say up to about 8' high—are treated with a good broadband absorber such as AudioTile, with the absorber coverage as close to 100% as can be achieved. The upper portion of the walls are "hard," creating a live reflective area.SpaceCouplers placed horizontally at just above the 8' high mark separates the height of the room into two areas with a controlled aperture. The SpaceCouplers in the aperture redirect sound energy into the upper portion of the room where it is diffused. Sound then returns—again redirected by the SpaceCouplers—to provide a "big room" reverberation tail that sounds exceptional. The quality of the resulting tail is smooth, without any acoustical artifacts or anomalies that would be difficult to work with in the post-processing and mixing phases.The loosely coupled space application is just the beginning. The SpaceCoupler can be used over flat absorbers to increase their efficiency. Two of our favorite applications of the SpaceCoupler are over absorbers above the mix position and over deep absorbers on the rear wall of a control room. The former is a very efficient, space-conserving method of eliminating the floor-ceiling first and second order axial modes that plague basement and bedroom studios. A relatively small area of SpaceCouplers over a few inches of noise absorption on the ceiling can greatly increase the low frequency "punch" in the room and allow for better mixing decisions for low frequency content. Bye-Bye Mud. Hello Translatable Mixes!The latter application—SpaceCouplers over deep sound absorbers on the control room rear wall—is most often found in "neutral" room designs. Mixing the SpaceCouplers with some SpaceArray diffusors over deep absorbers can provide high frequency scattering, yet still allow the low frequency sound into the deep absorbers to control modal build-up and noise cancellation in the room.Like the SpaceArray, the SpaceCoupler is handmade from solid wood. The craftsmanship is exceptional and the musical qualities of the Paulownia wood (used in musical instrument construction) give a very natura PSSC22

Keywords: 422031 AURELEX BERGER PART FOAM COUPLER SPACE 0 STUDIO RUSS TILE SCIENCEKeywords: 422031 AURELEX BERGER PART FOAM COUPLER SPACE 0 STUDIO RUSS TILE SCIENCE

Online ShoppingOnline Shopping: Musician's Friend offers a great way to save money on musical instruments, with their Clearance Center department, bulging with overstocks and discontinued gear at discount prices. They are constantly adding new discount bargains so check back often. Visit Musician's Friend for Auralex pArtScience SpaceCoupler Soundproofing Material and other Auralex, RecordingMedia and AccessoriesStudio Foam and discount musical instruments, music gear and musical equipment.

Click here for more Auralex products

Click here for more RecordingMedia and AccessoriesStudio Foam products

Browse products: Previous | Next
 
 
 

Featured Products for Saturday 30 AugustFeatured Products for Saturday 30 August

DigiTech RP500 Guitar Multi Effects PedalDigiTech RP500 Guitar Multi Effects Pedal

DigiTech RP500 Guitar Multi Effects Pedal

Get the best of both worlds with the DigiTech RP500 Guitar Pedal. The RP500 features a Pedalboard mode that allows you to turn on and off individual stompboxes and effects by pushing buttons 1-5. You get the expressiveness of stompboxes and you can change them from preset to preset. Next take the Amp/Cabinet Bypass button that defeats the internal amplifiers and cabinets leaving you with only stompboxes and effects and you have a switching machine.

DetailsDetails
 

Dano 63 Electric GuitarDano 63 Electric Guitar

Dano 63 Electric Guitar

The Dano 63 is a remake of the original '63 electric guitar that launched a thousand garage bands and more than a few pro careers. The body construction is just like the originals with a hardboard top and bottom laminated to a plywood frame. The hollow inner chamber produces the resonance that is part of Danelectro's unique tone.The '60s era lipstick pickups have been replicated to be hot, sweet, and to sound just right. The bridge and tuners are fully upgraded. Zero-gloss nickel hardware accents the cool retro colors. A blast!

DetailsDetails
 

 
Recommended BrandsMore Brands
Home  |  Brands  |  Categories  |  Site Map
vtac.org © 2008 | Store Street | Clothes | Vtac | Shoes | Janitorial | Xtreme Index