Vtac
HomeBrandsCategories
Applied Microphone Technology AMT ACC3 Stereo Accordion Microphone SystemApplied Microphone Technology AMT ACC3 Stereo Accordion Microphone System

Applied Microphone Technology AMT ACC3 Stereo Accordion Microphone System

The AMT ACC3 is a multi condenser 3 microphone system for accordion. The system contains the latest components in micro electronics. The ultra low mass makes placement easier than other systems on the market today. The system comes with the "Nano Blend" belt pack *Stereo Version. The stereo version is slightly different than the standard mono belt pack. The stereo version requires the player to use a Y cable. (1/4 in. stereo — Two 1/4 in. mono ends) The master volume control on the mono version is replaced with an on/off switch, and the GAIN controls on the mono version are replaced with volume controls.Housing most of the electronics outside of the accordion makes installation less complicated. With fewer holes to drill, it is easier and more dependable over many years of use. The battery is changeable outside of the accordion because it is located in the belt pack. It's small size and low mass gives the end user the ability to permanently or temporarily mount the microphone without major modifications to the accordion.The ACC3 accordion microphone comes with a wiring harness allowing installation of the bass mic through the bellows and mounted close to the bass machine. Some modification may be necessary to accommodate the third microphone. The microphone system is best suited for mic level inputs (PA systems) but also works with line level amps. The ACC3 will be wireless capable, able to be interfaced with major brand wireless products. The 9 volt battery life for operation is between 80-120 hours of intermittent use before replacement. The output of this system is activated by the quarter inch jack output when plugged in.The AMT ACC3 Stereo version has mixing capabilities right on the belt pack. The belt pack has two Volume controls to adjust the volume of the right hand microphones in relation to the left hand microphones. The belt pack also has trim filters. The trim filters only cut the highs / and or lows for both the right and left hand independently. You cannot boost highs or lows, this feature is designed to help the players with feedback.Requires phantom power.

Buy Online at Musician's Friend - Click Here!

Brand Name: Applied Microphone TechnologyBrand Name: Applied Microphone Technology

Category: Live SoundMicrophones and WirelessCondenserCategory: Live SoundMicrophones and WirelessCondenser

Store: Musician's FriendStore: Musician's Friend

Item Description: The AMT ACC3 is a multi condenser 3 microphone system for accordion. The system contains the latest components in micro electronics. The ultra low mass makes placement easier than other systems on the market today. The system comes with the "Nano Blend" belt pack *Stereo Version. The stereo version is slightly different than the standard mono belt pack. The stereo version requires the player to use a Y cable. (1/4 in. stereo — Two 1/4 in. mono ends) The master volume control on the mono version is replaced with an on/off switch, and the GAIN controls on the mono version are replaced with volume controls.Housing most of the electronics outside of the accordion makes installation less complicated. With fewer holes to drill, it is easier and more dependable over many years of use. The battery is changeable outside of the accordion because it is located in the belt pack. It's small size and low mass gives the end user the ability to permanently or temporarily mount the microphone without major modifications to the accordion.The ACC3 accordion microphone comes with a wiring harness allowing installation of the bass mic through the bellows and mounted close to the bass machine. Some modification may be necessary to accommodate the third microphone. The microphone system is best suited for mic level inputs (PA systems) but also works with line level amps. The ACC3 will be wireless capable, able to be interfaced with major brand wireless products. The 9 volt battery life for operation is between 80-120 hours of intermittent use before replacement. The output of this system is activated by the quarter inch jack output when plugged in.The AMT ACC3 Stereo version has mixing capabilities right on the belt pack. The belt pack has two Volume controls to adjust the volume of the right hand microphones in relation to the left hand microphones. The belt pack also has trim filters. The trim filters only cut the highs / and or lows for both the right and left hand independently. You cannot boost highs or lows, this feature is designed to help the players with feedback.Requires phantom power. AMT ACC3 StereoItem Description: The AMT ACC3 is a multi condenser 3 microphone system for accordion. The system contains the latest components in micro electronics. The ultra low mass makes placement easier than other systems on the market today. The system comes with the "Nano Blend" belt pack *Stereo Version. The stereo version is slightly different than the standard mono belt pack. The stereo version requires the player to use a Y cable. (1/4 in. stereo — Two 1/4 in. mono ends) The master volume control on the mono version is replaced with an on/off switch, and the GAIN controls on the mono version are replaced with volume controls.Housing most of the electronics outside of the accordion makes installation less complicated. With fewer holes to drill, it is easier and more dependable over many years of use. The battery is changeable outside of the accordion because it is located in the belt pack. It's small size and low mass gives the end user the ability to permanently or temporarily mount the microphone without major modifications to the accordion.The ACC3 accordion microphone comes with a wiring harness allowing installation of the bass mic through the bellows and mounted close to the bass machine. Some modification may be necessary to accommodate the third microphone. The microphone system is best suited for mic level inputs (PA systems) but also works with line level amps. The ACC3 will be wireless capable, able to be interfaced with major brand wireless products. The 9 volt battery life for operation is between 80-120 hours of intermittent use before replacement. The output of this system is activated by the quarter inch jack output when plugged in.The AMT ACC3 Stereo version has mixing capabilities right on the belt pack. The belt pack has two Volume controls to adjust the volume of the right hand microphones in relation to the left hand microphones. The belt pack also has trim filters. The trim filters only cut the highs / and or lows for both the right and left hand independently. You cannot boost highs or lows, this feature is designed to help the players with feedback.Requires phantom power. AMT ACC3 Stereo

Keywords: 270976 MICS ACCORDION AMTACC3 ACCORDIANS MIKE 0 MICRAPHONES SYSTEM ACCORDIANKeywords: 270976 MICS ACCORDION AMTACC3 ACCORDIANS MIKE 0 MICRAPHONES SYSTEM ACCORDIAN

Online ShoppingOnline Shopping: Musician's Friend offers a great way to save money on musical instruments, with their Clearance Center department, bulging with overstocks and discontinued gear at discount prices. They are constantly adding new discount bargains so check back often. Visit Musician's Friend for Applied Microphone Technology AMT ACC3 Stereo Accordion Microphone System and other Applied Microphone Technology, Live SoundMicrophones and WirelessCondenser and discount musical instruments, music gear and musical equipment.

Click here for more Applied Microphone Technology products

Click here for more Live SoundMicrophones and WirelessCondenser products

Browse products: Previous | Next
 
 
 

Featured Products for Saturday 30 AugustFeatured Products for Saturday 30 August

DigiTech RP500 Guitar Multi Effects PedalDigiTech RP500 Guitar Multi Effects Pedal

DigiTech RP500 Guitar Multi Effects Pedal

Get the best of both worlds with the DigiTech RP500 Guitar Pedal. The RP500 features a Pedalboard mode that allows you to turn on and off individual stompboxes and effects by pushing buttons 1-5. You get the expressiveness of stompboxes and you can change them from preset to preset. Next take the Amp/Cabinet Bypass button that defeats the internal amplifiers and cabinets leaving you with only stompboxes and effects and you have a switching machine.

DetailsDetails
 

Dano 63 Electric GuitarDano 63 Electric Guitar

Dano 63 Electric Guitar

The Dano 63 is a remake of the original '63 electric guitar that launched a thousand garage bands and more than a few pro careers. The body construction is just like the originals with a hardboard top and bottom laminated to a plywood frame. The hollow inner chamber produces the resonance that is part of Danelectro's unique tone.The '60s era lipstick pickups have been replicated to be hot, sweet, and to sound just right. The bridge and tuners are fully upgraded. Zero-gloss nickel hardware accents the cool retro colors. A blast!

DetailsDetails
 

 
Recommended BrandsMore Brands
Home  |  Brands  |  Categories  |  Site Map
vtac.org © 2008 | Store Street | Clothes | Vtac | Shoes | Janitorial | Xtreme Index